Best price on SPade Anchors!

 The basic tools I use most. 

 My must have boat building book list.

For the numbers oriented sailor, here are the design specifications for the boat.

LOA                           45.25'           Im                             58.78'
 DWL                        40.74'           J                               17.25'
 Beam                      13.92'            P                              53.85'
 Draft                          7.0'            E                               20.27'
 Displacement            24,403#            ISP                            60.45'
 Ballast                     8,600#            SPL                             19.0'
 Righting Moment         1952@1°            SA/Disp                        21.57
 Fuel Capacity             80 USG            Disp/Length                    161
 Water Capacity          200 USG            SA/WS                         3.12
 Sail Area, Main             629 sf
Sail Area, Jib                 504 sf

Lamination Schedule inside to outside:

One ply woven E-glass over entire hull
Two plys Klynex unidirectional S- Glass - laid transverse - Sheer to sheer
One ply woven Kevlar - laid waterline to waterline from bow to just aft of the beam
Core 11/8" Atlantic white cedar strips
One ply Klynex unidirectional S- Glass   - laid transverse - Waterline to waterline
Two plys Klynex unidirectional S- Glass - laid on opposing angles - Sheer to sheer
One layer woven E-glass over entire hull

Systems:

Auxillary power - Yanmar 4JH2CE Sail drive

Battery bank       - 6 L-16 floor polisher batteries - total capacity of 1,050 AH
                             with separate starter battery
Alternators          - Balmar 200A for house bank - standard alternator for starter battery
Charger/Inverter - Stat Power PROsine 2.5

Refrigeration      - TBA
                             Insulation 2" VacuPanel (R40+)

Heads and holding tanks -  2 of what ever Peggy says.:-)

Site last modified:04/12/04